Dear customer,
As paint pens and wax are special liquids and pastes, we will arrange a special logistics company for transportation and provide you with the logistics tracking number (you can check on the order page, and there will be logistics updates 5 days after shipment).
If you have any questions, please contact customer service directly. We will handle them for you within 24 hours. Thank you very much for your support.
If no suitable color is found, please communicate with the customer service and leave a message about the
Car+Year+Exact color name+ Paint color number
We have thousands of colors, and there is always one color for you.
Paint Pen Notes:
1. Capacity: 12ml paint pen
, We will give you a free scratch wax 15g to try out.
2. This pen will only remove slight scratches, which may require additional application. This pen will not remove dents or deep scratches!!! The direct application of the paint repair pen will be uneven and not as effective as the shop spray paint.
Due to the different age and model of the car, there may be some differences in the same paint number, which cannot be completely the same.
3. There are two repair methods:
-the first is
a paint pen single set
, and the pen tip can repair small scratches no more than 2 cm.
-The second type of
paint touch pen+scratch wax
is suitable for large-area repair (less than 0.08
㎡, no leakage of car primer), as shown in the figure.
Steps for use:
Step 1
:Rotate the white cover of the touch-up pen counterclockwise and
take out the brush inside.
(For personal use, we do not recommend using a pen, as using a brush is easy to operate.)
Step 2: Apply the color on the test paper to
check the color (especially important),
and continue only when the color is similar to the car
Step 3
:Before touching, clean the scratch area before use Scratch wax and Paint pen
. Wipe the car surface with scratch wax several times (Rub hard). After
shaking the stylus 10 seconds
, use a brush moistened in tablet liquid or tip to brush in the faulty position.
Step 4: If it is not completely covered by an operation, wait for the first coat of paint to dry, it's about 3hours, and then apply the second coat until the defect is completely covered, and wait for all the paint to dry in the defect. Finally, you can use sandpaper or cloth to polish it flat, and then wipe it clean with scratch wax. Use on sunny days to ensure product effectiveness.